Recent content by canman

  1. C

    roller bunks

    hi everyone, I was thinking about installing those 5 foot roller bunks on top of my bunks instead of going out to buy a roller trailor. has any body tried these ? thanks .
  2. C

    1996 125 merc smokes alot

    hi everyone, my 1996 125 merc when it is forward and going slow seems to cough and sputter a lot and seems to smoke quite abit but once you pick up speed it smoothes right out , I was thinking of switching over to premix and getting rid of the oil injection, any ideas? thanks .
  3. C

    which size gearcase ?

    hi everyone , well I was going to order a new four blade prop for my motor but I don't know the gearcase size . it is a 1996 merc 125 h.p . does anybody know what size gearcase this motor has ? . thankyou .
  4. C

    what spark plug and gap?

    hi everyone , I just bought a 1996 125 hp merc, I want to put new plugs in it and add some sea foam in the tank, do you know what plug it takes and what to gap the plugs at ? thankyou .
  5. C

    gas gauge not working now.

    hello everyone, well I just had a new steering cable installed in my boat and now my gas gauge does not work anymore, It worked great until the new cable was installed. now when you turn on the key the needle just stays at the bottom like there is no power going to it . the mechanic says there...
  6. C

    1996 mercury tilt and trim, what fluid do you use ?

    hi everyone, I just got a 1996 merc 125 hp. what fluid do you use for the tilt and trim ? thanks .
  7. C

    whole sale marine bimini top

    hi everyone, well I ordered a new bimini top for our boat about a week ago, I have not heard back from them yet, not even a email to them when it was going to be shipped or a tracking number. for some reason if you live in Canada you can not call them by phone . has anybody on hear done business...
  8. C

    1992 chaparral 22 foot bowrider .

    hi everyone, its been quite a while since I have been on here . anyway I just bought a nice 1992 chaparral 22 foot bowrider with the 350 engine and merc sterdrive. my question is , does anybody know how much this boat weighs and how much fuel it holds ? thanks .
  9. C

    want to switch ford to gm engine

    hi everyone , my neighbour has a steel boat with a 302 ford engine with a merc sterndrive. , he wants to pull that engine and put in a 350 chev engine, he wants to know if the merc stern drive will bolt up to the chev engine or not . thankyou .
  10. C

    1998 mariah 202 shabah

    hi everyone, I am looking at a 1998 Mariah shabah 20 foot bowrider with the 350 mag engine with the thrull hall exhaust. does anybody know how much this boat weighs and how big the gas tank is .? thankyou .
  11. C

    need to shorten sending unit ?

    hello everyone , I need to put a new sending unit in my gas tank , my gas tank is only 5 inches deep , the smallest moeller sending unit is 8 inches . can I take my tube cutter and shorten the shaft and reflare the bottom of it ? the tank is in my 1997 doral and it is a 20 gallon tank . thankyou .
  12. C

    115hp and 135hp , whats the difference?

    hi everyone , I have a 1996 merc 115 hp , I seen a 1996 merc 135hp , they look the same to me , anybody know what the difference is ? they are both 4cylinders , maybe different carbs ? thanks .
  13. C

    no feed back steering

    hi everyone , I have a 1997 doral bowrider with a 115 merc on the back , I would like to change out the rotary steering to a no feedback system . what I need to know is can I just change out the helm or do I have to get a new cable as well . thanks
  14. C

    tach jumping all over the place ?

    hi everyone , i have a 1996 115hp merc on our boat , the tach jumps all over , at idle it will read 5000 rpm and then it will jump all over . could it be a loose wire or some said about a setting on the back of the tach . if the tach is shot do the wires run back to the motor ? i use to have an...
  15. C

    teleflex steering loose ?

    hi everyone , my steering seems to be loose turning the boat to the right , i have the trim tab adjusted has far as it will go to stop this , but that does not seem to help going fast or slow , is there some type of adjustment under the dash that i can tighten up abit ? . thanks .
See more
Top