Recent content by ARCHSEA BUNKER

  1. A

    yamaha 250txrz fuel management gauge

    HI GUYS, GOT GOOD HELP HERE BEFORE, LAST WEEK MY FUEL MANAGEMENT GAUGE STARTED TO BE INTERMITTANT FLASHING ON AND OFF FUEL BURN NUMBERS, TODAY I ONLY HAVE 2 BIG ZEROS ON TOP AND TWO SMALLER ZEROS ON BOTTOM OF GAUGE AND NO FUEL BURN NUMBERS AND AFTER TRYING TO RESET THEM HOLDING THE TWO BUTTONS...
  2. A

    Happy Fathers Day !

    " MANY OF THE MOST HIGHLY PUBLICIZED EVENTS OF MY PRESIDENCY ARE NOT NEARLY AS MEMORABLE OR SIGNIFICANT IN MY LIFE AS FISHING WITH MY DADDY' our ex president JIMMY CARTER.
  3. A

    sitex cv106mk11

    anyone know where i can send this unit to have it checked out, was working great now only speed and temp , transducer brand new, does not seem to have moved from the stern thank you
  4. A

    yamaha sx250txrz 2001 rodbolt you out there

    Put New Tank In Boat, All New Lines And Vent, All New Filters, Racor Vst And One On Motor, Had All The Injectors Serviced, Motor Ran Sweet 5700 Rpm No Problem, Put About 75 Gallons Of Fuel Through System. Then Today Motor Stalls I Squeeze The Bulb Get The Motor Going Limp Home Squeezing The...
  5. A

    Yamaha 250 Sxtxrz Remote Oil Tank,rodbolt I Am Kicking Myself

    Rodbolt And Cousin Abe, As You Know This Has Been An Ongoing Saga'no Oil From Remote Tank To Engin Tank, Solved Today.here's What Happened. Last Year I Had The Marina Remove The Motor So I Could Do Some Work On The Transom , When Finished They Dropped It Back On And Hooked It Back Up ,shortly...
  6. A

    Yamaha 250 Sxtxrz Remote Oil Tank ,rodbolt

    Rodbolt, Still Cannot Get Oil From Remote, If Brown Wire Is Damaged Within The Ecu How Would That Affect My Diagostics, I Am Sure I Have The Right Harness But After The Connection From The Remote Oil Tank ' 4 Wires' Down Low On The Starboard Side The Brown Wire Continues On To An Other Conector...
  7. A

    Yamaha Sx250txrz Remote Oil Tank, Please Rodbolt

    I Removed The Four Wire Connector From The Remote Tank And Tested Continuity Of The Wires From The Connector Back To The Connector Inside The Engine Cowling.all Tested Good.i Checked The Brown Wire For 12v.nothing.i Then Peeled Back The Harness And Followed The Brown Wire.it Went To A Three Wire...
  8. A

    VOLVO PENTA KAD44pedc /dp 260hp

    Anyone Know This Motor, Reliabilty, Maintenance Issues, Lifespan, Approx Cost Of Rebuild Thank You Its 1996 Model Thank You
  9. A

    Yamaha Sx250txrz Rodbolt

    I REMOVED THE FUEL INJECTORS TODAY, SENDING THEM OUT FOR SERVICE, WHILE REMOVING THEM I NOTICED A WHITE SUBSTANCE WHERE THE ELECTRICAL WIRES PLUG IN ,IN ALL CYLINDERS LOOKED LIKE TIPEX OR WHITE GREASE FOR WANT OF A BETTER DECRIPTION, WHAT IS IT?, should it be there thank you
  10. A

    Yamaha 250txrz

    where is the poppit valve located, what does it do, should i change it thank you
  11. A

    Yamaha Sx250txrz Rodbolt

    Re O2 Sensor Test, How Difficult Is It And What Am I Looking Forthank You
  12. A

    Yamaha Injectors

    Just Removed The 6 Injectors From Yamaha 250 Where Can I Send Them To Checked At A Fair Price, I Belive It Was Posted On Here Before, Thank You
  13. A

    yamaha 250txrz / 106601

    wanted used ecm panel for this motor, or mabey its called the cdi unit, its the main panel at the rear of this motor, where all the wires feed ,i have a problem with my remote oil tank feed, rodbolt told me to check different items in an earlier post , done that but it seems where these wires...
  14. A

    Yamaha 250 Salt Water Series

    I Have A Yamaha 250 Salt Water Series 1999 ,it Has A Remote Oil Tank, Will Not Feed Tank On Motor, Changed Oil Filter On Remote Tank, Put Direct Power To Pump ,works Fine, Toggle Switch On Motor To Manually Feed Small Tank Does Noot Work, But When Oil Level Drops Alarm Sounds Whats The Problem...
See more
Top