Recent content by 68 - 390

  1. 6

    2.3L OMC Carb Questions?

    Thank you so much - I'll dive into it soon.
  2. 6

    2.3L OMC Carb Questions?

    Hello All - I got back from an unsuccessful trip to the lake engine would start and idle smoothly but when I put it in gear and throttled up there was no power and to me it seems like a lack of fuel. Note this carburetor was probably the dirtiest one I have ever seen and shame on the previous...
  3. 6

    1987 2.3L OMC Steering Questions

    Thanks so much Lou. I am testing the boat in the water this coming weekend so I'll report back and let you all know how it goes. I appreciate your help!
  4. 6

    1987 2.3L OMC Steering Questions

    Yes this was performed while the engine was not running.
  5. 6

    1987 2.3L OMC Steering Questions

    Like to add another picture for more reference to my questions above.
  6. 6

    1987 2.3L OMC Steering Questions

    Hello All, I have recently noticed that when steering my boat I heard a slight knocking noise and had my friend assist me in scoping out the issue. In the attached picture item #16 moves side to side when steering and seems to have too much play back and forth. There also seems to be a rubber...
  7. 6

    Alternator Help

    Hello There, I have an issue with my charging circuit. Manual shows 4 wire alternator and mine is the same see pictures. I'm not sure what would be a suitable replacement? The ID tag is worn off and I cannot make out the model number. My boat is a 1987 2.3L OMC stern drive - when the engine is...
  8. 6

    Exhaust Bellows 3.0 cobra

    Thanks Bruce, I was able to see it with a mini inspection camera and surprisingly was able to fish it out using a small grabber tool. I will put a new one on for sure.
  9. 6

    Exhaust Bellows 3.0 cobra

    Ok verified that hose goes to the transom. Flushed water through all the lines to make sure clean water was coming out. Then I noticed when I pulled the water pump off I think I dropped the vent tube down the hole. Does anyone know where that goes? And if it’s going to interfere with anything...
  10. 6

    Exhaust Bellows 3.0 cobra

    I'll have to verify if it goes back to the transom mount, but yes connects to the power steering cooler. Will have to double check when I leave the office and get back home. Correct its a 2.3 liter OHC My boat is a 1987
  11. 6

    Exhaust Bellows 3.0 cobra

    This is a great idea thank you. I'm assuming this is the hose to disconnect and fill with water?
  12. 6

    Exhaust Bellows 3.0 cobra

    Well I got it all back together over the weekend thank you all for your help and advice. Ended up burning up my water pump housing, don't think I had enough water pressure going through my muffs. Didn't get it to prime also forgot to grease the impeller too - so ordered new stuff - my bad...
  13. 6

    Exhaust Bellows 3.0 cobra

    Thank you for this. Much appreciated.
  14. 6

    Exhaust Bellows 3.0 cobra

    Great call. I’ll order parts once I have it apart. I did order new impeller kit too. So nice it’s on the back of the drive vs having to drop the leg to do it.
  15. 6

    Exhaust Bellows 3.0 cobra

    Thank you so much for your reply. I'll keep you posted how things go.
Top