Added SS hinges to keep seat in place and make it easier for access.
Peddle boat being lowered. I removed one holding rod (stb side) while leaving the port side rod connected to the boat.
Built a peddle boat lift that can raise and lower the peddle boat into the water by using the stern drive. Made two rods and installed cleats on the p
Bench seat. Removing old material and replacing with new grey vinyl that can take the odd spill. Also makes it easier when sliding into or out of the
Added SS hinges to keep seat in place and make it easier for access.
I cut the plywood in half before recovering. Don't have to remove the whole bench now to get access to storage.
Lots of wasted space in the bow of a 2755. Got tired of setting up the v-berth and taking down to use as dinette. And then having to store the extra c
Using finnished 1x3 to frame the support.
onthelake2010

Added SS hinges to keep seat in place and make it easier for access.

There are no comments to display.

Media information

Album
2755 Projects
Added by
onthelake2010
Date added
View count
284
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Top