Got some time yesterday to take a closer look at the trailer. Seems that the boat mainly rests on the fenders so I took them off.
Pics included have bunks at 2nd lowest setting. Main weight is taken by the fenders and bunks.
The pics without fenders you can see the middle roller now takes the majority of the weight but the bunks don’t having equal weight distribution.
I thought I could possibly move the winch post further from the front roller. I also dropped the winch on slot so it is pulling straight as someone suggested.
Im thinking rotate the bunks and level them and then fabricate some smaller fenders. And possibly move the winch post more toward the tongue of the trailer. Thoughts??
Pics included have bunks at 2nd lowest setting. Main weight is taken by the fenders and bunks.
The pics without fenders you can see the middle roller now takes the majority of the weight but the bunks don’t having equal weight distribution.
I thought I could possibly move the winch post further from the front roller. I also dropped the winch on slot so it is pulling straight as someone suggested.
Im thinking rotate the bunks and level them and then fabricate some smaller fenders. And possibly move the winch post more toward the tongue of the trailer. Thoughts??
Attachments
-
photo285603.jpg1.8 MB · Views: 0
-
photo285604.jpg368.2 KB · Views: 0
-
photo285605.jpg2.1 MB · Views: 0
-
photo285606.jpg1.7 MB · Views: 0
-
photo285607.jpg2 MB · Views: 0
-
photo285608.jpg1.6 MB · Views: 0
-
photo285609.jpg1.7 MB · Views: 0
-
photo285610.jpg1.9 MB · Views: 0
-
photo285611.jpg1.7 MB · Views: 0