I narrowed down my issues with my WRIII and the last thing left to freshen up is the carb. Before I ordered a new rebuild kit, I decided to open it up and just check out how the parts looked. Most of the parts looked almost brand new, but the fuel regulator pump was cracked...and below that, the two screws seemed stripped as in the phillips head is almost rounded out.
I replaced the diaphragm and plan to reinstall the carb and see if that fixes my top end issues, but at some point I will have to open the plate that covers up the high end jets (I think that is what's under the plate)
See photos.
So the question: Does anyone have any bright idea as to how to remove the screws without drilling them out which seems dangerous to me...
-Rob
I replaced the diaphragm and plan to reinstall the carb and see if that fixes my top end issues, but at some point I will have to open the plate that covers up the high end jets (I think that is what's under the plate)
See photos.
So the question: Does anyone have any bright idea as to how to remove the screws without drilling them out which seems dangerous to me...
-Rob