I live on a lake and it was really a pain to snap on and off my boat cover. Half the time it collapsed in the middle. After the first cover ripped and died we switched over to velcroing a heavy duty tarp to the boat. That actually worked better.
But, I was wondering if anyone tried to make a 'cap' out of pvc and covered with a tarp that would set over the top of the boat. Then when the boat is to be used, 1 person could simply grab each end and lift it off and set it on shore. It would need to be bungeed down, of course. Just thought I would check and see if anyone has done this before starting the project. FYI: A lift with a canopy is out of the question on my lake.
But, I was wondering if anyone tried to make a 'cap' out of pvc and covered with a tarp that would set over the top of the boat. Then when the boat is to be used, 1 person could simply grab each end and lift it off and set it on shore. It would need to be bungeed down, of course. Just thought I would check and see if anyone has done this before starting the project. FYI: A lift with a canopy is out of the question on my lake.