tool for hinge pin removal

[jollyRogers]

Where can I get the proper tool to remove the hinge pin out of a sx-m Volvo penta outdrive

 

[elimontfort]

I understand this isn't the proper tool. But I used a c clamp and a socket. I looked for the tool also and couldn't find one.

 

[bruceb58]

1/2" hex. That's what the factory manual says to use.

I use one on a socket.

 

[Fun Times]

Or iboats has the tool as well. http://www.iboats.com/Mallory-Hinge...le-_-Mallory&gclid=CKeEz-vPu74CFc5ffgodH7kA0Q

 

[jollyRogers]

Thanks for the info. I have a second challenge. The pivot pin and the trimming cylinder on one side have become one. I have been putting penetrating oil on it for about 24 hours and hitting it with a soft face dead blow hammer. I am thinking of putting it into a press but not comfortable with the idea. any sugestions.