If anyone can get me a few pictures as to how the power steering hoses are routed too and from the pump it would be greatly appreciated. <br /><br />Currently, after major service at the dealer, both are routed between the exhaust manifold and the elbow in the exhaust right after the manifold. One is wrapped in some sorf of sleave and the other isn't. I'm pretty sure its the high pressure side that isn't wrapped because there is a geyser of power steering fluid where the exhaust burned a hole right through the hose.<br /><br />The boat is a 1997 Four Winns Horizon, and the engine again is a 4.3 GL Volvo. Any 4.3 GL should do though because power steering is routed by Volvo and not each individual manufacturer.<br /><br />Thanks a bunch,<br />Dan
