Welcome Guest - Sign Up today
Welcome Guest - Sign Up today

Announcement

Collapse
No announcement yet.

Smartcraft monitor v. 2.01 reset

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Smartcraft monitor v. 2.01 reset

    Hello,
    I have just purchased this 2003 Sea Ray 270SD with a 496 and 300 hours. I tried setting my gasoline used back to 0 and messed up the gauges. Dealer did a factory reset and he and I did the Cal 1 and Cal2. When you power up the monitor it reads the version 2.01 then goes to hours without numbers, just dashes. I have hours mode on and they will come up when you push mode to that item, but not on start up. Also, my speed does not show up on the monitor anymore, just on analog. Any ides of what I'm not doing...? Thank you for any help!

  • #2
    Speed will not show up unless you have the wheel mounted to the transom, most don't have it

    Hey QBhoy have any ideas
    94 Formula 27PC Custom 509MPI MEFI3 , B3 XR
    95 Rinker 232 w/ 7.4L Carb 0F425011 B1 0F486471
    07 Seadoo GTX
    Merc Adults Only VP Adults Only
    G-Dad always said "First Liar doesn't stand a chance"

    Comment


    • #3
      Originally posted by AllDodge View Post
      Speed will not show up unless you have the wheel mounted to the transom, most don't have it

      Hey QBhoy have any ideas
      Hi
      if you hold in “-“ and “mode” for a second or two it will put you into a menu selection. If you hold them in for about 5-7 secs, you get the full menu which allows you to calibrate and customise. Let me know if you need anything further. I have the full manual on both the speedo and tachometer. Sc1000 models.

      Comment


      • #4
        Thanks for the input! (engine 496) My speed did show up before I messed up the monitor settings. I have the old square monitor gauge with version 2.01, not the newer speedo or tach monitor. I have ran through the Cal 1 and Cal 2 settings. One strange thing is the hours will show up when I push mode to that item, but not when it should upon start up after the 2.01 (version) the screen comes up for hours, but its dashes...? When I first got this also, it never showed and error code of two engines are configured as starboard "stbd" upon start up now it does I only have one engine (not a big deal, but possible a clue..?). Lastly, with the speed in Cal 2, I'm not sure what to use, but it has water pressure sensor at 100, maybe with the 496 it should be 200. The paddlewheel frequency is at default of 4.9, I'm not sure if I have a paddle wheel sensor or not...?
        Thanks again I appreciate your help! I just realized I'm in outboards forum.lol

        Comment


        • #5
          Ayuh,...... Welcome Aboard,..... No reason to start another thread 'bout the same topic,....

          Just post in the original thread, 'n bring it back to the top,......
          'n when postin' in the wrong forum, just ask a Mod to move it,....

          Comment


          • #6
            https://dmna.ny.gov/nynm/manuals/Mer...ons_Manual.pdf
            NO PERSONAL QUESTIONS, THIS IS WHAT THE FORUM IS FOR.

            Comment


            • #7
              Smart Craft SC 1000 manual link
              https://www.google.com/url?sa=t&rct=...auE2FSIxl9gh6p
              NO PERSONAL QUESTIONS, THIS IS WHAT THE FORUM IS FOR.

              Comment


              • #8
                Sign up today
                Thanks for the links. I should have mentioned I have the manual and followed it pretty well, except for the questions I had. Again, we have the old monitor not the speedo/tach system. I tried to find a more advanced manual, but could not.
                I think its set for dual engines, but we only have one. You can change that in version 1, but version 2 doesn't have that setting.

                Comment

                Working...
                X