grizzreaper
Petty Officer 2nd Class
- Joined
- Oct 8, 2007
- Messages
- 160
Good morning to everyone. So far so good on the donor motor. I have put my wiring harness on, it's all wired n ready to go. This motor came with a backyard key switch. I thought the switch was bad. So I wired in a new switch. If I jump the starter she cranks and fires right up. I turn the ign key I get nothing. Thought solenoid was toast so I put a new one in. there is four post on this key switch and three on other. Three post has Bat,Sol,and Ign. Four post has Bat, ACC, St, and Ign. What wire numbers go to what post. Thanks again for all your help. Hoping to put her in the water next weekend.