Hi guys
Been of the forum for a year or so but now need help.
I have an evinrude 120 looper.
She ran great on the muffs
I then removed the VRO as i was going to run premix.
Now after i did this and drove 75miles to the lake.
Now she wont start. I have checked all coils for a spark but nothing.
What i have done so far
Replaced the battery. Was done before i had the issue.
Connected all the VRO wires and hose back up.
Removed the boat side of wiring so i know its not that.
Jumped the starter with the red plug removed Still no spark. So i know it is engine side of wiring.
I removed the one black and yellow wire from under the flywheel to the cdi ( is it the wire from the stator ??? ) Still no spark.
This is an intermittent fault she she fired up for a bout 30 seconds on one try to get her going but died afterwords and wont even give a sign she wants to start again.
Its has the CD3 Ignition system
She has 125psi on all 4.
When she was on the muffs and before i removed the VRO she ran and started first turn of the key.
Am i missing something stupid ???
I know what i am looking for on a Johnson Crossflow but loopers and CD3 is all new to me.
This is driving me crazy Help guys please.
Been of the forum for a year or so but now need help.
I have an evinrude 120 looper.
She ran great on the muffs
I then removed the VRO as i was going to run premix.
Now after i did this and drove 75miles to the lake.
Now she wont start. I have checked all coils for a spark but nothing.
What i have done so far
Replaced the battery. Was done before i had the issue.
Connected all the VRO wires and hose back up.
Removed the boat side of wiring so i know its not that.
Jumped the starter with the red plug removed Still no spark. So i know it is engine side of wiring.
I removed the one black and yellow wire from under the flywheel to the cdi ( is it the wire from the stator ??? ) Still no spark.
This is an intermittent fault she she fired up for a bout 30 seconds on one try to get her going but died afterwords and wont even give a sign she wants to start again.
Its has the CD3 Ignition system
She has 125psi on all 4.
When she was on the muffs and before i removed the VRO she ran and started first turn of the key.
Am i missing something stupid ???
I know what i am looking for on a Johnson Crossflow but loopers and CD3 is all new to me.
This is driving me crazy Help guys please.