creeksidelc
Cadet
- Joined
- Jul 10, 2006
- Messages
- 19
Hi, I recently purchased a 1975 Johnson 6 hp. I used to have a 77 model so I'm pretty familiar with this motor. It will not start or even try to start. Compression is 70 in both cylinders. I cleaned carb and put a rebuilt kit in it. I replaced coils and points and set them correctly. I've got good spark on top and bottom. I can't get the motor to even try and start. I've even tried starting fluid just to try and rule out a fuel issue. Even with starting fluid motor does nothing. Any ideas what it could be?