Tiny-Tach install on Bayliner 1800 Capri 3 Cyl. 90 HP

[La Bullet]

Very easy to install and works fine. http://www.tinytach.com/tinytach/index.php
Extra large pic: http://photos.imageevent.com/sniperalezgunworks/inbox/huge/tiny tech.jpg

 

[fucawi]

Re: Tiny-Tach install on Bayliner 1800 Capri 3 Cyl. 90 HP

having sold thousands of these I would suggest that the signal wire is kept away from other plugs (use the lower plug) and not loomed with other wires .. ie if harness is on starboard put the wire up the port side . Increase the number of turn on the lead if neccessary.
but if you are happy I am happy .

 

[John_S]

Re: Tiny-Tach install on Bayliner 1800 Capri 3 Cyl. 90 HP

I purchased a Tiny Tach "clone" that had some configuration adjustment. I am able to test all my outboards and use it to verify the I/O tach. A great tool.

 

[La Bullet]

Re: Tiny-Tach install on Bayliner 1800 Capri 3 Cyl. 90 HP

Thanks, Good suggestion.

having sold thousands of these I would suggest that the signal wire is kept away from other plugs (use the lower plug) and not loomed with other wires .. ie if harness is on starboard put the wire up the port side . Increase the number of turn on the lead if neccessary.
but if you are happy I am happy .

 

[La Bullet]

Re: Tiny-Tach install on Bayliner 1800 Capri 3 Cyl. 90 HP

fucawi, I took your suggestion and ran the wire port side, Thanks again.