I have a 2007 Suzuki DF225
my trim gage stopped working. I found that the sensor was bad replaced the sensor and the gage.
My gage is in the up position with the key off, when the key is turned on it pegs to the down position. I checked the resestance at the sensor and change is noted.
However at the back of the gage wires removed I show no change in resistance. Is there something I between the sensor and the gage that I’m missing that might cause this problem
2TBone
my trim gage stopped working. I found that the sensor was bad replaced the sensor and the gage.
My gage is in the up position with the key off, when the key is turned on it pegs to the down position. I checked the resestance at the sensor and change is noted.
However at the back of the gage wires removed I show no change in resistance. Is there something I between the sensor and the gage that I’m missing that might cause this problem
2TBone