I use the mat and its an 80`s model sabre and the transom was rotten in a 3 foot section so i scraped it out dried it really good and placed new wood sealed it wit epoxy the i put my fiberglass
I have replaced the part of my transom that was rotting with new wood and I laid 3 coats of fiberglass on the transom is there any thing I should do to it before I put on the motor?
I use the mat and its an 80`s model sabre and the transom was rotten in a 3 foot section so i scraped it out dried it really good and placed new wood sealed it wit epoxy the i put my fiberglass