lifeisfun
Petty Officer 1st Class
- Joined
- Oct 21, 2006
- Messages
- 304
So..., finally got new Humminbird 575
Installed and it works great except that when the boat goes
faster than 10MPH I get excessive spray from the transducer
I moved it high as possible without drilling new holes to the transom
but it didn't help much. Should I make spray guard or take the risk
and re-drill new set of holes ?
I hate to ad any more hole to brand new G3 boat ( DeepV)
The transducer is installed exactly as recommended in the installation manual.
It is fairly large ( quadrabeam)
Installed and it works great except that when the boat goes
faster than 10MPH I get excessive spray from the transducer
I moved it high as possible without drilling new holes to the transom
but it didn't help much. Should I make spray guard or take the risk
and re-drill new set of holes ?
I hate to ad any more hole to brand new G3 boat ( DeepV)
The transducer is installed exactly as recommended in the installation manual.
It is fairly large ( quadrabeam)