Re: 1989 Cheetah 210es restore - not looking forward to this
since it has been so long since I have done any update at all here we go with a few things
I eventually got to the point of needing a good air compressor to keep up with my sander and a place to get the boat off of the trailer so off to my dads shop it went.
once there we just worked under the barn lean too until it was time to come off the trailer we got it all sanded down fixed some cracks and got a little primekote on as well as mounted pull up cleats
then it was off the trailer it came, a lot easier than i thought it would have been, now time to fix the cracks from the bottom side now from the rot where it flexed on the bunks in a few spots, it really sucks glassing upside down BTW
and that's about where were at as far as the boat goes we had a solid month of 100+ degrees and we just got burned out on the project but its cooling off now so about time to get back on it here soon. but in the meantime we have worked on the trailer when we had the time and cut some of the wood for the interior and took it to the upholstery guy