Search results

  1. H

    Replacement bolt 91 Evinrude 115

    http://www.marineengine.com/parts/sierra_parts/8024/catalog.html?http://www.marineengine.com/parts/sierra_parts/8024/80240185.htm Does anyone know what type/thread Item #1 is? The thermostat cover had been previously removed by the former owner and one of the bolts was a bit rounded. All 3...
  2. H

    '91 115 Evinrude, new impeller, telltale working O-Temp warning

    I just changed the impeller out. All back together running fine on the muffs. After a few minutes the over-temp warning horn goes off. The stream is strong out of the telltale and the water is warm not hot. Any ideas/help greatly appreciated. My other 115 Johnson runs for a long time and I...
  3. H

    OMC Adhesive M - Substitute - Impeller

    I'm sure this has been asked but, didn't find a thread when I searched. What substitutes are available at an Auto parts store for "OMC Adhesive M" and "OMC Gasket Sealing Compound"? Can I use #2 Permatex Form-a-gasket in place of the OMC Gasket sealing compound? I'm changing an impeller on a...
  4. H

    90 115 Johnson dies at WOT

    Not sure why the motor started dieing after a minute or so at WOT. This went on for several tries then went away. Fuel obstruction? Air leak in the fuel vacuum? I'm' going to retry today. Motor appears to be running fine.
  5. H

    91 115 Evinrude water pump/Thermostats

    Anyone know any tipstricks/ for changing the impeller and thermostats on this motor? It's been sitting for a while and I ran it on the muffs yesterday. The heat sensor went off and the heads were hot to the touch. So was the pee stream. One curious note, when I shut engine off water...
  6. H

    1990 Johnson 115 carburetor leaking

    I have a 1990 115 that I just rebuilt both carbs. Went by the manual with the exception of the knock outs with the gasiola replacement. Buttened it up, checked for leaks, bulb firmed up, no leaks. Started the motor and it purred like a kitten. 45 seconds later fuel started dribbling out of...
  7. H

    1990 Johnson 115 carburetor rebuild

    I think it's time for a rebuild and wanted to know the best place to get a kit and if there are any gotcha's model#J115TLESB. Motor tries to stall when accelerating from 1500 RPMs to 3000 RPMs. If I hit the choke it takes off fine. Runs great at idle and at WOT.<br /><br />I've solved this...
  8. H

    1982 25 hp Force no spark on top cylinder

    I have a friend who has a 25 hp Force that has been sitting for about 7 years.<br />When he pulls the cord there is no spark on the top cylinder. He hasn't tried to start it yet<br />but, we weren't sure if this motor had some strange firing pattern where it starts off of the bottom...
  9. H

    78' Merc 20 Lower unit

    I have a freind that has 78' merc who's lower unit is FUBAR due to the prop twisting its way into the lower unit housing. He bought a rebuilt unit for $150 from a dealer and it shifts the opposite of his original unit. Another budy of ours took the new unit apart and it's clocked differently...
  10. H

    90' Johnson 115 VRO boggs down

    Unit runs great on motor flusher. Runs great at full throttle on the water and a trolling speed. I have to hold the key in to choke the motor to get it to transition from slow to fast once on plane runs perfect. Idles smooth also. It just developed the VRO horn warning of pulsed horn every...
  11. H

    90' Johnson 115 v4 VRO 20s horn warning

    My motor just started this warning horn. It makes the rapid pulsed horn sound, stops and then repeats. Manual says no oil to the injector pump. The tank is full and the bulb is firm. Also, the motor dies if I try to move the throttle from idle to fast while in gear on the lake. If I press...
Top