Recent content by losnbama

  1. L

    what yr(s) johnson???

    Re: what yr(s) johnson??? here is the setup today without a 48qt live-well,tackle bag(10lbs),my 275lb big arse on the back seat,everything else is in front of the middle seat...im probly to much for planing out with this motor lol
  2. L

    65 fd-19 throttle stop plate question

    http://forums.iboats.com/attachment.php?attachmentid=121643&d=1320965911 can anyone tell me where the shift lock should be at wot in forward?
  3. L

    what yr(s) johnson???

    Re: what yr(s) johnson??? 2 coats on...2 coats to go
  4. L

    what yr(s) johnson???

    Re: what yr(s) johnson??? not just yet kfa4304.seein as im out of $ on this project.im stuck on the shifter...i found one but not the exact one...had to modify the shift lock to fit the shifter...it sits in neutral and reverse good but im not sure about forward gear...it engages good but the...
  5. L

    Why grade 8 for pulling flywheel ??? confused on this

    Re: Why grade 8 for pulling flywheel ??? confused on this this is why plain and simple...normal bolts are to soft and will retain the shape when twisted to far. hardened bolts wont twist much when pulling a flywheel if the right bolts are used.hence the flywheel will pop off before the bolts...
  6. L

    20r71s ???'s

    edited...ive put off my own project to help a friend out...what ive found so far...core plug on cyl head asbly gone and has sucked up what looks like rubber gasket.bad deal i think.top plug is oil fouled,btm plug is carbon fouled,top wire hot with one plug and not the other,btm wire intermittent...
  7. L

    eska(sportfisher)1971 model #1733c 5hp

    Re: eska(sportfisher)1971 model #1733c 5hp soon as i run my flapper valve about how good this motor runs,,,it spits and sputters,hard to start,shutters and will even stop running at high throttle...so i put it in the barrel for a controlled start,warm up and normal set up procedure...as i...
  8. L

    what yr(s) johnson???

    Re: what yr(s) johnson??? how do yall think all this looks??? have they been replaced at some time or orig?
  9. L

    '66 3hp johny mod# jw21e

    Re: '66 3hp johny mod# jw21e its here on this model. JW21E 1966 and it looks like the left set of holes got most of the flow since it was first put in the water some 45yrs ago???
  10. L

    eska(sportfisher)1971 model #1733c 5hp

    Re: eska(sportfisher)1971 model #1733c 5hp i gotta show you guys this... good compression and may be a little lean on the fuel mix???
  11. L

    '66 3hp johny mod# jw21e

  12. L

    eska(sportfisher)1971 model #1733c 5hp

    Re: eska(sportfisher)1971 model #1733c 5hp i shoulda showed this pic when i took it... but here it is anyways i see a coil pak,condenser, and points.no coufin on this model...why???
  13. L

    eska(sportfisher)1971 model #1733c 5hp

    Re: eska(sportfisher)1971 model #1733c 5hp i raised it up 2 3/4". the lil eska pushed a fully loaded boat (3ppl rods,trolling battery and motor) up a flooded river pretty good..its perfect for putt-puttin around lol
  14. L

    eska(sportfisher)1971 model #1733c 5hp

    Re: eska(sportfisher)1971 model #1733c 5hp yeah mine looks bout the same
  15. L

    what yr(s) johnson???

    Re: what yr(s) johnson??? got the lower unit water pump etc. on this morning...started on the fuel pump and UUUGH wat a mess...cant seem to find the right rebuild kit for it. the only #s i can find on it are inside one cover(black plastic)311197 and the other side(alum) 3040892 any ideas? outer...
See more
Top