Recent content by lagerosk

  1. lagerosk

    1973 Chrysler 105, gear oil leak

    Hi All, I was fitting a boarding ladder to me boat today when I noticed an oil leak from a small hole beneath the gearbox vent plug. At first, I thought this was due to friction damage from the towing support but on closer inspection, the oil is leaking from a drilling in the gearbox housing. I...
  2. lagerosk

    '73 Chrysler 105, Anode location

    Hi All, I have just finished rebuilding my 105 Chrysler and need to know where the factory anode was fitted on these motors. The Clymer manual says that it is located behind the prop, but looking at this space, it doesn't look possible! Are there any other factory locations for zinc anodes on...
  3. lagerosk

    Chrysler 105 - Hydraulics and o/b mounted switch

    Hi all, I have 2 questions regarding my Chrysler 105 1) Does anyone know where the small hydraulic plunger is meant to be mounted?(pics attached). My hydraulic system does not have a trim piston, only the main motor lift piston, but it does have a small hydralic plunger that is not attached to...
  4. lagerosk

    105 rebuild completed

    Hi All, Just completed rebuilding my 105 Chrysler motor tonight - will start it (hopefully) tomorrow. Would like to thank Frank A, Franz Marine and any others who responded to my questions - you guys are superb. I would definately recommend Franz, sent parts from the states to NZ as promised...
  5. lagerosk

    Chrysler 105 Gearbox Oil Capacity

    Hi All, does anyone know the gearbox oil capacity for a Chrysler 105 (1973)? Thanks
  6. lagerosk

    Chrysler 105 Thermostat direction

    Hi All, Just putting my 1973 engine back together and can't remember which way the thermostat was originally fitted. I have a new T'stat (have to use old gasket though) but my head design is different to what is shown in the Clymers manual. Can anyone confirm if the attached photo is correct? or...
  7. lagerosk

    3 ring v 2 ring Chrysler Pistons

    I am rebuilding my Chrysler 105 and have replaced one piston. I've had a new sleeve fitted to number 3 and have had to fit one 10 thou oversized new piston on the new sleeve. The new piston supplied only has 2 rings, the old pistons have 3. The new piston came with rings, so I bought 3 piston...
  8. lagerosk

    Chrysler 105 Exhaust cover plate

    Hi All, I am in the process of rebuilding a 1973 Chrysler 105 and need to find a new or good second-hand aluminium exhaust cover plate. If you know anyone who has such a part and would be willing to sell it (and package and post it to New Zealand) could you please let me know. Any help...
See more
Top