Long story short, nothing happens at the ptt switch on the binnacle or on the side of the motor.
nothing happens at the motor when you turn the key to start. No solenoid clicking......absolutely nothing. There is 12V at the 20amp fuse on the powerhead and 12V at the battery post on the solenoid.
Here's the catch, I think its something simple as I pulled the three carbs today and rebuilt them,
then had this issue when I went to start motor afterwards. I feel like something is unplugged but have checked every ring terminal, every bullet connector, every plug and wiring harness that I can see.
Nothing was touched at the console/binnacle area. Puzzled why I have 12V at the solenoid but get nothing when the key switch is hit and how would that be related to both ptt switches doing nothing? Thanks for any help
nothing happens at the motor when you turn the key to start. No solenoid clicking......absolutely nothing. There is 12V at the 20amp fuse on the powerhead and 12V at the battery post on the solenoid.
Here's the catch, I think its something simple as I pulled the three carbs today and rebuilt them,
then had this issue when I went to start motor afterwards. I feel like something is unplugged but have checked every ring terminal, every bullet connector, every plug and wiring harness that I can see.
Nothing was touched at the console/binnacle area. Puzzled why I have 12V at the solenoid but get nothing when the key switch is hit and how would that be related to both ptt switches doing nothing? Thanks for any help