Having issues with my warning horn. Will need to post a few questions as I go along.I have an OEM manual for the motor. You will need one also to follow me. Looking at the wiring schematic( diagram or whatever it is called)on the last page of the manual ,bottom left is the VRO plug. Off of this plug comes a tan and black bullet connector which appear to go nowhere. Above the VRO plug is the vacuum switch ( in the daigram I think it is the vacuum switch)with the tan and black wire again. My first question is what do the bullet connectors go to( the ones which appear disconnected in the diagram)? My harness has been manipulated so I need to get it right so my warning horn operates correctly. Sometimes my hot light goes on along with the horn. The engine runs fine, I have used it for the last two years as it is, it does not run hot nor do I believe there to be a fuel restriction. Just want it(the warning system) to operate should hot or restriction be an issue.