pasquale1968
Cadet
- Joined
- Sep 4, 2004
- Messages
- 17
Hello and happy to be here. i could use some help with my 98 mariner 115 hp carbuerated 2 stroke.I recently took apart the trim motor and found one of the connections to one of the brushes had come loose so i resoldered it and got it back in running condition,however i do not seem to know the proper way to refill the trim unit. i tried putting some hydraulic fluid in lower unit and attempted to raise and lower motor but no luck thus far i would happy with any suggestions or if anyone could possibly tell me the proper procedure to refill the unit Thanks Pasquale1968