I tried searching the forums for this type of issue and couldn't find anything, so hopefully this isn't a duplicate.
I have a 2009 Crestliner Superhawk with a Mercruiser Alpha One Gen 2 motor. My trim is currently stuck in the down position. Both the up and down tilt/trim buttons will cause the pump to make a "click" noise and come on briefly, but the motor will not move.
I've checked all the wiring connections and they appear to be clean and in good condition.
Any ideas what this could be?
I have a 2009 Crestliner Superhawk with a Mercruiser Alpha One Gen 2 motor. My trim is currently stuck in the down position. Both the up and down tilt/trim buttons will cause the pump to make a "click" noise and come on briefly, but the motor will not move.
I've checked all the wiring connections and they appear to be clean and in good condition.
Any ideas what this could be?