Transom Conducting Current but doesn't appear to be wet!

[Bartine]

Re: Transom Conducting Current but doesn't appear to be wet!

Thanks for the help and advice...

3M 5200 to seal the holes, right?

Also I have one hole that I would like to seal up on the outside. It is from a transducer.. It is a 1/4inch diamter hole.. Kind of large for a screw hole, but that can be another conversation..

Would this stuff work ok for that is is it not to be trusted and order some marine tex or west epoxy from a marina.. I just go to the hardware store anytime and pick this up.

http://www.loctiteproducts.com/p/epxy_mrn_s/overview/Loctite-Epoxy-Marine.htm

That stuff will yellow after about 1 year.

 

[Yacht Dr.]

Re: Transom Conducting Current but doesn't appear to be wet!

Your going/should die grind/bevel the edge of the hole..pack it with some Glass reinforced putty..minimum ..

A little grind out and a small patch of mat is best. then finish.

YD.