johnnybgood
Seaman
- Joined
- Jun 12, 2012
- Messages
- 72
When the inside bracket was attached I sanded the gel coat and mixed an epoxy putty and coated the bracket and original transom then clamped it and screwed it with SS screws, left the SS screws in. The bracket was then coated in epoxy and CSM just too make it water proof. I 'm a little confused now. May be you can clarify for me. When using epoxy resin do you have to remove all the gel coat or just de-wax and sand the gel coat to rough in up. I am about to start putting the deck in if I am going at this the wrong way need to find out now, again I am using epoxy resin and not polyester if that makes a difference. Thanks in advance for your help