sptjet90Reflexx
Petty Officer 1st Class
- Joined
- May 28, 2011
- Messages
- 383
Hey guys been awhile since i posted but I have a question.
My bayliner reflexx starts just fine without water. Let it run for about 10 15 seconds or so and slowly add water to the engine and it will shut down. then it cant be started anymore. turn off the water and let it dry out and it cranks up again.
Headgasket? i checked the compression on all the cylinders and they were within specs. but it does look like the plugs might be getting wet.
is there a rebuild kit? im just going to pull the motor so links would be helpful
Thanks!
My bayliner reflexx starts just fine without water. Let it run for about 10 15 seconds or so and slowly add water to the engine and it will shut down. then it cant be started anymore. turn off the water and let it dry out and it cranks up again.
Headgasket? i checked the compression on all the cylinders and they were within specs. but it does look like the plugs might be getting wet.
is there a rebuild kit? im just going to pull the motor so links would be helpful
Thanks!