Fiberformboatowner
Seaman Apprentice
- Joined
- Mar 11, 2013
- Messages
- 41
Hey guys, so I bought this boat last year for $300 guy said that it sat uncovered for 2 years, snow and heat got the best of this boat but I have faith it's equipped with a 1977 Johnson 200 hp and the motor runs perfectly. So I noticed a lot of soft spots on the deck started cutting the floor up. Every peice fell apart like wet cardboard, luckily enough found that the transom is still all in tact and one out if the four stringers was rotten, so I cut all the rot off and found that the Wood was good about 1/4 inch away from the hull so my question is can I glue A new Piece of wood right ontop of the old stringer then glass it all in? Ill upload pictures when I get home anything thoughts?