BradleyPLKD
Cadet
- Joined
- Jan 16, 2012
- Messages
- 27
Due to stupidity on my part, my props ended up being frozen on my 290 Dp-A duoprop and I had to cut them off. In the process I had to cut into the original front and rear line cutters. When I went to the volvo penta store to order the replacement parts, it shows that the line cutters have been replaced by "thrust rings." So it looks like they don't make that part anymore and are just selling spacers?
If so it looks like I install the parts in this order from front to back: This is for gas 5.7L with B4 props
forward thrust ring/front prop/tab washer/threaded prop nut/rear thrust ring/rear prop/pressure washer(stainless ring)/plastic washer/prop cone/cone screw
Can you guys just confirm this is all correct?
Oh yeah, and lots of prop grease throughout...
If so it looks like I install the parts in this order from front to back: This is for gas 5.7L with B4 props
forward thrust ring/front prop/tab washer/threaded prop nut/rear thrust ring/rear prop/pressure washer(stainless ring)/plastic washer/prop cone/cone screw
Can you guys just confirm this is all correct?
Oh yeah, and lots of prop grease throughout...