Twin 4.3 OMC with cobra drives
I broke the shift cable which engages reverse and forward between the motor and the out drive on the port motor.
Removed the out drive and discovered the outer sheath right at the brass slider where the shift cable guide slides on was broken.
Unscrewed the brass slider and left the broken cable in place and am hoping that I can use it to pull the new cable through.
I now have the complete assy. on order I hope to replace it next W/e so any advice would be appreciated.
I have all the dimensions required but am concerned as to how?? and if I can feed the new assy through the rubber hose ????
Any advice would be appreciated.
I broke the shift cable which engages reverse and forward between the motor and the out drive on the port motor.
Removed the out drive and discovered the outer sheath right at the brass slider where the shift cable guide slides on was broken.
Unscrewed the brass slider and left the broken cable in place and am hoping that I can use it to pull the new cable through.
I now have the complete assy. on order I hope to replace it next W/e so any advice would be appreciated.
I have all the dimensions required but am concerned as to how?? and if I can feed the new assy through the rubber hose ????
Any advice would be appreciated.