I have a 1987 omc 3.0 with an omc cobra drive.
The problem I am having is after about 40-50 mins of runing the boat under a load it will start to misfire intermittently. The boat has always charged about 15Volts, which I had thought to be a bit high.
If i adjust the tilt while under a load it makes the skip much more noticable which leads me to believe that it is something electrical. I have already replaced the following:
-coil (from local auto parts store,not a marine coil, does it matter?)
-plugs
-wires
-distribuor cap
-rotor
-condensor
Could this be a bad resistor/regulator?
If anyone has any ideas please help and thank you in advance.
The problem I am having is after about 40-50 mins of runing the boat under a load it will start to misfire intermittently. The boat has always charged about 15Volts, which I had thought to be a bit high.
If i adjust the tilt while under a load it makes the skip much more noticable which leads me to believe that it is something electrical. I have already replaced the following:
-coil (from local auto parts store,not a marine coil, does it matter?)
-plugs
-wires
-distribuor cap
-rotor
-condensor
Could this be a bad resistor/regulator?
If anyone has any ideas please help and thank you in advance.
Last edited: