janthonyb7
Cadet
- Joined
- Jun 15, 2002
- Messages
- 10
I have a 1998 30 horse johnson outboard motor. the motor would not run but half way with the cowlin on. with the cowlin off it runs great. I cut a hole in the cowlin right in front of the carb. now if the motor sits for a day or two it runs like its not getting all the gas it needs. After about 15 minutes of running the motor, jerking and everything else, it starts running right but cut it off for an hour same problem. I have rebuilt the carb, the fuel pump, replaced all the fuel hoses, changed the plugs.i'm lost need help.