Need to find a yamaha oil pressure sender for a f200 f200txra

[mokaction]

Anyone out there??


Need to find a yamaha oil pressure sender for a f200 or f225 2002 to 2006. part number would be 69J-83651-01-00. Looks for good used one.. thx,
Larry

 

[rodbolt]

Re: Need to find a yamaha oil pressure sender for a f200 f200txra

used ones are rare as hens teeth or republicans that dont lie.
new they are rather pricey.
why do you think you need one ?

 

[rodbolt]

Re: Need to find a yamaha oil pressure sender for a f200 f200txra

used ones are rare as hens teeth or politicians that dont lie.
new they are a tad pricey.
what makes you thinks its bad ?

 

[mokaction]

Re: Need to find a yamaha oil pressure sender for a f200 f200txra

used ones are rare as hens teeth or politicians that dont lie.
new they are a tad pricey.
what makes you thinks its bad ?

Rod,

I was pulling off the motor and I forgot to pull of the wiring to the oil sender and broke it off. I notice that there where some resisters that the insulation chipped off.

Have not been able to turn on the motor to check it if it is still working, but I didn't want th chance it. Maybe I will just wait and till I have the motor together, then check.

Larry

 

[rodbolt]

Re: Need to find a yamaha oil pressure sender for a f200 f200txra

ouch
good luck finding a good used one.
I thinks it fits the F200/f225 and some of the F250's.
last one I replaced was about 320 dollars.

 

[BruceAML]

Re: Need to find a yamaha oil pressure sender for a f200 f200txra

That is not a valid part number that you listed.

 

[mokaction]

Re: Need to find a yamaha oil pressure sender for a f200 f200txra

Bruce, not sure. what number did you get?? I got that number from boats.net

Thx for the reply.

Larry

 

[rodbolt]

Re: Need to find a yamaha oil pressure sender for a f200 f200txra

if its a US market motor the factory yamaha website can provide parts lists,numbers and diagrams.

 

[mokaction]

Re: Need to find a yamaha oil pressure sender for a f200 f200txra

Robolt,

Thx, for all the help, looks like I just glued it back together with some eloxy and it works fine. I check it out with my Diagnositic Software

Larry