Re: More transom problems, need some advice
New problems, more great advice needed :-(
Was down at the boat today and thought it's time to get it going with the outside.
I decided that I would like to give it a good wash before I did anything else so I started up the old pressure washer and as if I didn't have enough to do I created my self some more job. Problem is, One side of my brain says "I would like to grind out some of it and then rebuild it" but my other side of my head says "I just have to dry it out, sand it slightly and then apply some top-coat."(gel coat with added paraffin wax)
It looks like they applied one layer of gel-coat and then added a layer of a very thin roving and then another layer of gel-coat and then begun to laminate the boat. The pictures almost speaks for it self... Picture 5 will def need some grinding I think and I do have some more of this kind but what about the rest?
) - Splash day arrived with a sunny but windy day so I had to cut the fishingtrip down to 2 hours due to that my daughter felt sea-sick. As you all know, this would not be able without all your help and as promissed I asked my "Admiral" to take some photos 4 you. Next trip I will bring my good camera instead of the mobilephone and take som shots for the completed project page.
