Hey guys! Seams it never ends with my boat.. Ive put a new reman in my boat with vortec heads I had it out all was good except the issue with bogging after 4200 rpm. Well that aside Im now getting milky oil. I figured intake gaskets so I changed them out to the felpro 1255 change the oil and all was good for one trip. Now today I fire it up on the hose and 15 minites milky oil. ... and I notice alot of steam in coming out my starbourd exhaust so I pull the manifold and water just pours out of the exhust ports in the head and manifold. I pull the plugs in them four cylinders and there soked with water. Could this make the oil milky in a very short time?? I did change the oil 3 times and its milky within 15min on the hose Help?