Kschoen123
Cadet
- Joined
- Apr 5, 2016
- Messages
- 7
Hey Guys,
I've been reading the forums for a long time but this is my first post. Engine serial number is OC866571. I am working on rebuilding my carb but ran stuck here. I believe it's a mercarb, its a 2 barrel. I got a number off the side, 33049565 9Y02. The choke is stuck open, i can close it a bit by hand but it is binding inside the carb I can see the rub marks on either side. I took off the linkage and the spring to make sure and a also loosened the screw holding the choke plate and tried to center it better but its just too tight in there. Also, the bracket for the flame arrestor is broken? Has anyone ever had this before?
I've been reading the forums for a long time but this is my first post. Engine serial number is OC866571. I am working on rebuilding my carb but ran stuck here. I believe it's a mercarb, its a 2 barrel. I got a number off the side, 33049565 9Y02. The choke is stuck open, i can close it a bit by hand but it is binding inside the carb I can see the rub marks on either side. I took off the linkage and the spring to make sure and a also loosened the screw holding the choke plate and tried to center it better but its just too tight in there. Also, the bracket for the flame arrestor is broken? Has anyone ever had this before?