Ok, I have successfully replaced my Gimbal Ring, an brilliant me decided that since the shift cable was starting to show its age. No problem, I'll pop a new one in there while the ring and bellhousing is apart...No problem....<br /><br />Last night I got the drive back on (yes, the allen head screw is snu, but not tight). Shifting was flawless when operating the cable by hand, but when I attached everything to the shift plate, the only thing that worked right is neutral... I seems like there is slack in the cable as it would only shift far enough to ratchet, but not lock the prop. The slack is like the core moving around in the cable. Where did I go wrong?