i386
Captain
- Joined
- Aug 24, 2004
- Messages
- 3,548
I bought a quart of gray Interdeck from the iBoats store. I was reading the label after it arrived today. Dang if it didn't says to use Interlux 333 thinner with it, but it doesn't say how much or if it's optional.
I know when I use their Epoxy primer it says to use 2333N and thin it down 20% (and I did). IIRC you could optionally thin Perfection. I can't remember if I did or not.
So does anyone know how much Interdeck needs to be thinned down or if it's optional? I'm putting down 2-3 coats of Interlux 2-part epoxy primer first, then 2 coats of Interdeck. I'm just going for good coverage but nothing fancy in the finish department.
If I need to order some 333 I will. Funny thing is there is a description of the 333 in the iBoats store, but no price or link to buy it.
I know when I use their Epoxy primer it says to use 2333N and thin it down 20% (and I did). IIRC you could optionally thin Perfection. I can't remember if I did or not.
So does anyone know how much Interdeck needs to be thinned down or if it's optional? I'm putting down 2-3 coats of Interlux 2-part epoxy primer first, then 2 coats of Interdeck. I'm just going for good coverage but nothing fancy in the finish department.
If I need to order some 333 I will. Funny thing is there is a description of the 333 in the iBoats store, but no price or link to buy it.