OK so everyone helped me set up my 2 12v batteries into a 24v setup.
But as I was hooking everything back up I found a new dilemma.
I have a onboard charging system that came original on the boat -- 2 red and 2 blacks leads that were used to charge the 2 batts in the old 12v system.
I now have a 24v TM and have setup the 2 batteries in a 24v setup.
My question is Do I hook up the 2 reds and 2 blacks to each battery and overnight charge --- or Do I connect the red to batt 1 and the black to batt 2 and charge the whole system similiar to how it outputs the voltage.
I didnt want to blow something up --so better to ask before I proceed
But as I was hooking everything back up I found a new dilemma.
I have a onboard charging system that came original on the boat -- 2 red and 2 blacks leads that were used to charge the 2 batts in the old 12v system.
I now have a 24v TM and have setup the 2 batteries in a 24v setup.
My question is Do I hook up the 2 reds and 2 blacks to each battery and overnight charge --- or Do I connect the red to batt 1 and the black to batt 2 and charge the whole system similiar to how it outputs the voltage.
I didnt want to blow something up --so better to ask before I proceed