fishfeatures
Senior Chief Petty Officer
- Joined
- Mar 29, 2011
- Messages
- 743
After fitting a water pressure gauge to my motor as I had a slight overheat , so replaced the impeller just to be sure and also fitted a gauge. With the motor trimmed or tilted in shallow water, what PSI is ok for the engine when trolling along? Or so long as there is even 1 psi there's water going through the motor?
currently it's reading 6 @idle and 17 @ wot but I do troll on my river and sometimes end up in the shallows so jsut want to make sure I don't harm the motor if I have it tilted up high so I don't damage my prop.
currently it's reading 6 @idle and 17 @ wot but I do troll on my river and sometimes end up in the shallows so jsut want to make sure I don't harm the motor if I have it tilted up high so I don't damage my prop.