fish_head_soup
Cadet
- Joined
- Sep 30, 2012
- Messages
- 7
hello folks, i've started to take the lower leg off my outboard to check the impellor. the engine is brilliant but water outout seemed to drop lately. have only been running it on ear muffs the last three months, approx. 5 times. so hasn't picked up any rubbish and not sudden salt build up so figured it must be impellor. if i crank the hose up it increases the output so either i did not have enough pressure in the first place or all the lobes are off the impellor and water is getting by!
i have all 6 bolts off the lower case and the gear linkage split pin out but the case is not coming off easily. i don't want to focre anything so was hoping for some advice.
also, how hard is it to source parts for these motor now? its a 1994.
thanks
i have all 6 bolts off the lower case and the gear linkage split pin out but the case is not coming off easily. i don't want to focre anything so was hoping for some advice.
also, how hard is it to source parts for these motor now? its a 1994.
thanks