Re: flywheel revoval
I have a 1989 v6 175 hp gmc inboard motor.I need to replace the flywheel.Do i need to pull the motor out,or can I replace the flywheel with the motor still in the boat.
Ayuh,... What Outdrive,..??
Is the problem, Stripped teeth,..??
If so,...
Ya gotta pull the outdrive, then the motor...
If you can gain the space to work, the motor can stay in the hull,...
You'll need a few Feet...
Then pull off the flywheel, 'n knock the Ring Gear off the flywheel...
Take the New Ring Gear, 'n pop it in the oven, set to 450? for about 20 minutes or so...
It'll Drop right inta place when placed on the old, but cleaned up flywheel....
The heat will get sucked out quickly, 'n it's there for Good...
Then bolt it All back together, 'n figure out Why it happened in the 1st place....