Hopefully the attachment works...
I have these 4" round blower vent holes, the origional pieces had broken louvers however they went into the hole approximately 2", enough to secure the vent hose to and were almost flush with the boat.
I ordered these from iboat: http://www.iboats.com/T-H-Marine-Lo...00254280--**********.823362725--view_id.47932 However they only go in the hole maybe 1/8" or so, not enough to secure the hose to.
Does anyone know where I can find the above with enough internal tubing that the vent hose can re-attach?
Only alternative I see is going with the Cowl vents with the chrome covers, but I'm resistant since they stick out and rob space from the platform and could become broken
http://www.iboats.com/Exterior-Mari...0254280--**********.823362725--view_id.257681
Thanks!
-Chris
I have these 4" round blower vent holes, the origional pieces had broken louvers however they went into the hole approximately 2", enough to secure the vent hose to and were almost flush with the boat.
I ordered these from iboat: http://www.iboats.com/T-H-Marine-Lo...00254280--**********.823362725--view_id.47932 However they only go in the hole maybe 1/8" or so, not enough to secure the hose to.
Does anyone know where I can find the above with enough internal tubing that the vent hose can re-attach?
Only alternative I see is going with the Cowl vents with the chrome covers, but I'm resistant since they stick out and rob space from the platform and could become broken
http://www.iboats.com/Exterior-Mari...0254280--**********.823362725--view_id.257681
Thanks!
-Chris