Hey guys, new here. I recently bought a boat, motor, and trailer from a friend of a friend for 400 dollars. the boat is an alumacraft 16 ft and the engine is an 1982 evinrude 35. i bought it knowing it had some mechanical problems which included a bad lower unit. so i replaced that and had the water pump replaced by a professional ( same person i bought the lower unit from). well i removed the engine from the boat which intailed removing the shifter cable, steering cable and all electrical contacts. while i had it off i replaced the rotted mounting board. well i get the engine back up to par for its age and place it back on the boat along with attatching everything back. i think i must have messed up the electrical wires because when i turn the key, nothing happens at all, no tick no nothing. so i tried hooking the battery to my car and running the car engine while i cranked, still nothing. so i ran out of daylight and now im at home waning over the problems. please let me know any information you can give me. thanks guys!!!