desertratz
Seaman Apprentice
- Joined
- Jul 16, 2017
- Messages
- 49
just bought this boat with a 1992 evinrude 150 te150glenc. it cranks but no start. it has no spark on any cylinder. i bypassed the lanyard/killswitch and still no spark. i checked the resistance values on the stator and all are within spec except one which is reading 90 ohms and the range is 50-60 ohms. for some reason i am suspecting the optical sensor because the timing wheel was loose and worn and i had to break it off to remove it. im thinking it may have been hitting the optical sensor and damaged it, any help is appreciated.