Abductedkris
Recruit
- Joined
- Jun 20, 2009
- Messages
- 5
OK guys this should be easy for all the experts in here. I recieved a Montgomery Ward 7hp motor (found in grandpas woodpile). I have the motor "running" but want to fuigure out how to fine tune the carb. (Vid of motor on youtube search "1973 K700")
I'm attaching a pic of the carb "Walbro LMB 179" and am hoping someone can tell me which screw is which, and how to adjust them. I'm certain #1 in the pic is the idle, but not sure what #'s 2 and 3 are. I've never seen a needle in the bottom of a bowl like this. I've taken the carb apart and cleaned, fesh gas, good spark, compression is 85 lbs hot or cold.
Model: K700 2106A
Serial: 740395
Type: 60 27407R
Thanks guys
Kris
I'm attaching a pic of the carb "Walbro LMB 179" and am hoping someone can tell me which screw is which, and how to adjust them. I'm certain #1 in the pic is the idle, but not sure what #'s 2 and 3 are. I've never seen a needle in the bottom of a bowl like this. I've taken the carb apart and cleaned, fesh gas, good spark, compression is 85 lbs hot or cold.
Model: K700 2106A
Serial: 740395
Type: 60 27407R
Thanks guys
Kris