I am wanting to check my lower unit oil. I went to a local mercury boat shop and told them what I needed but I am not sure if he gave me the right part. When I took the drain plug out there was a white washer on the screw that was very difficult to get off. The part that I bought does not look like what came off of the drain plug, it is blue and does not fit as snug to the screw as what I took off, it also says seal on the package instead of washer. Basically the new seal is loose around the screw. The part number on the package is quicksilver 12-19183, when I go to the internet and search it just says it is for Mecury. I have 1989 Force 85HP and the serial is 856X9G. Could anybody help me out with this, I want to make sure I have the right part?
Also, I was able to get the fill plug screw off but am not able to get the drain plug screw off. I tryed tapping the screw driver with hammer but this still did not work. Any suggestions on this.
Also, I was able to get the fill plug screw off but am not able to get the drain plug screw off. I tryed tapping the screw driver with hammer but this still did not work. Any suggestions on this.