I am having an issue with the trim on my 05' DF115 Suzuki. The first problem was the engine would, at random, tilt down and wouldnt stop. So it would continuously run in the down position, untill I unhooked the engine from battery terminal. It was consistently an intermentent problem and checked both switches, the one on the throttle shifter on console and the one on the engine itself. Both seem to work fine. Looke like I had a relay problem so I pulled the relay out and opened it up to look at the contacts in the relay, bingo!! It had bad contacts it looked like, they were black looking (burnt) cleaned them up real good and hooked relay back up and wouldn't you know that it does not get stuck in down position now but when I try and go up on trim it only goes up slightly and stops and when I let go of trim up button it actually trims down for a second and then stops and this is with no one actuating either of the switches. I checked the switch that tells the trim it has reached its maximum height up and it was not made when the motor stopped trimming up and the fact that it trims down a little bit after you let go of the trip up switch just baffles me lol......anyone?!?!