Hey guys, thanks for the first response with the fuel overflow question. It would fire, run for about 3 seconds, then die. Did this every time I pulled the cord.. I pulled the carb and there was a thick black O-ring that was almost completely disintegrated on a post right in the middle of the cork float. It was keeping the float from moving. I looked at the rebuild kit for this carb and I didn't see this O-ring. Is it just a guide for the float and if so, do I really need it?
Second question: When I reassemble the carb, how many turns out is my initial setting for the lean/rich mixture setting that connects to the knob on the front of the cowling.
Thanks
HP
Second question: When I reassemble the carb, how many turns out is my initial setting for the lean/rich mixture setting that connects to the knob on the front of the cowling.
Thanks
HP